How to Use Tools Safely : Hammer

How to Use Tools SafelyWork Smarter. Stay Safe.

How to Use Tools Safely

Safety Tips

Every tool is safe in careful hands. Before any job, take one minute to check your tool, your workspace and yourself. A safe habit today can save you from an injury tomorrow.

Read all safety tips ›Hide safety tips ‹

Scroll down inside this box to read all the tips.

For Every Tool

Read the manufacturer's manual before you use any tool for the first time.
Wear the right protective gear: safety glasses, gloves where suitable, hearing protection, a dust mask and strong closed shoes.
Check the tool before every use. Look for cracks, loose parts, worn handles and damaged cords.
Use the right tool for the right job, and never use a tool for something it was not made to do.
Keep your work area clean, dry and well lit, and keep children and pets away.
Stay calm and focused. Never rush, and never work when you are tired or feeling drowsy.
Clean your tools and store them safely after every job.

Hand Tools

Choose the correct size. A tool that does not fit slips, and a slip causes injuries.
Never use a screwdriver as a chisel or a pry bar.
Replace hammers and tools that have loose heads or cracked handles.
Cut and carve away from your body, and keep blades sharp because dull blades slip.
Pull a wrench towards you instead of pushing, and keep your balance.
Carry sharp tools with the point down and never keep them loose in your pocket.

Power Tools

Unplug the tool or remove the battery before changing a bit, blade or disc.
Clamp your work firmly so it cannot move while you cut or drill.
Keep all guards in place and hold the tool with both hands when the job needs it.
Avoid loose clothes and jewellery, and tie back long hair.
Let the tool reach full speed and do the work. Do not force it.
Keep the cord away from the cutting edge and never carry a tool by its cord.
Wait until the moving part stops completely before you put the tool down.

Electrical

Treat every wire as live until you have tested it.
Switch off the power at the main breaker and confirm it is off with a tester before you touch anything.
Never work with wet hands, on a wet floor or near water.
Use insulated tools and throw away damaged plugs, cords and extension leads.
Do not overload sockets or extension boards.
Use a safety switch (RCD or GFCI) where possible.
Leave fixed wiring and the main board to a licensed electrician.

Automotive

Park on firm, level ground, apply the handbrake and block the wheels.
Never trust a jack alone. Always support the vehicle with proper jack stands.
Let the engine cool down before you touch the exhaust, radiator or coolant.
Disconnect the battery before electrical work, and keep sparks and flames away from fuel and the battery.
Work in an open or well-ventilated place because exhaust fumes can be deadly.
Keep hands, hair and clothing away from belts, fans and moving parts.
Dispose of used oil and fluids in the proper way.

Household Tools

Place a ladder on level ground and keep three points of contact with it at all times.
Check the wall for hidden pipes and wires before you drill or hammer.
Keep tools in a toolbox, out of the reach of children.
Cut away from your hands and change blunt or broken blades quickly.
Read the label on glues, paints and cleaners, and open a window while you use them.
Keep a first-aid kit at home and know where it is.

If you get hurt, stop work and get medical help. Work slowly, stay alert and go home safe.

Tools Shop

How to Work Safely

Read this article

Browse Topics

Hand ToolsLearn about hand tools, uses, and safety tips.Power ToolsPower tool guides, usage and safety.ElectricalElectrical tools, wiring and safety.AutomotiveCar tools, maintenance and repair tips.Household ToolsDIY tools for home and everyday use.Tools Shop

Request a Guide

Want a guide on a tool we have not covered yet? Tell us and we may write it next.

Hand Tools Safety: Protect Yourself While Working at Home